H3C无线AP自动注册上线流程
1、配置AP管理vlan,业务vlan
本案例使用AP管理vlan 100 业务vlan 200
2、配置管理vlan
#
interface Vlan-interface100
ip address 192.168.100.1 255.255.255.0
#
3、开启管理vlan DHCP
#
dhcp enable
#
dhcp server ip-pool 100
gateway-list 192.168.100.1
network 192.168.100.0 mask 255.255.255.0
#
4、开启AP自动注册（建议AP注册上线完成后关闭）
#
wlan auto-ap enable //开启自动注册
wlan auto-persistent enable //开启自动固化
#
5、连接POE放行相关vlan 接上AP，AP自动注册上线。
# 通过display wlan ap all命令可以看到AC与AP建立连接，AP的状态为Run。
[AC] display wlan ap all
Total number of APs: 1
Total number of connected APs: 1
Total number of connected manual APs: 1
Total number of connected auto APs: 0
Total number of connected common APs: 1
Total number of connected WTUs: 0
Total number of inside APs: 0
Maximum supported APs: 3072
Remaining APs: 3071
Total AP licenses: 128
Remaining AP licenses: 127
AP information
State : I = Idle, J = Join, JA = JoinAck, IL = ImageLoad
C = Config, DC = DataCheck, R = Run, M = Master, B = Backup
AP name AP ID State Model Serial ID
741f-4a35-6e00 1 R/M WA4320i-ACN 219801A0T78156A00049
6、更多参考文献H3C官方文档
